Data

Reinforced steel panel, pre-numbered front and rear ports with front write-on areas for port identifications and accepts EZ or HD modular connectors for true multimedia applications.
This blank patch panel consist of 24 staggered ports and fits 1 rack mount space (RMS).

48-port high density version provides room for 48 ports in two rack mount spaces (2 RMS).

The feed-through in-line coupler modular jacks are 8-position 8-conductor
(8P8C), Category 3 (CAT 3), and connect two modular cords; Pin 1 to Pin 1

ICC now has a one tool solution compatible with all of ICC's new modular voice and data connectors for faster and improved hand held jack termination. This single handed 4 pair modular connector termination tool terminates 8 wires and cuts excess wire in one squeeze reducing installation time and improving terminations for increased performance and reduced call backs.

#12-24 x 5/8 inch pilot point mounting screws are for use on distribution racks.

Bulk Velcro cable ties are designed to facilitate the fastening of cables securely and make cable management and color-coding identification easy and quick.

ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.

The 2 rack mount spaces (RMS) finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.

The 2 rack mount spaces (RMS) finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws.

ICC's Dual 4"x5" Vertical Finger Duct Panel comes 78" height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.

Dual Vertical Finger Duct Panels (side-mount) are designed to compliment the ICC 7' and 4' Distribution rack. The panels are 4"x 5"x 35" high and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help keep cables organize and neat appearance.

The 1.75 x 19 inch panel fills 1 RMS open space between system panels. Includes #12 mounting screws.

The 5.25 x 19 inch panel fills 3 RMS open space between system panels. Includes #12 mounting screws.

The 19" width x 1.75" height x 6" depth, 1 RMS, wall mount bracket is designed with rear openings and a hinged tab for easy cable access. Eight #12 screws included in package. (ROHS)

The 19" width x 3.5" height x 6" depth, 2 RMS, wall mount bracket is designed with rear openings and a hinged tab for easy cable access. Eight #12 screws included in package. (ROHS)

Bracket is designed to be mounted and secure runway sections over cable management and distribution racks. Includes mounting hardware.

10 feet length runway sections are designed to support horizontal cable running over-head. Constructed of heavy duty 16-gauge steel with a durable powder coated finish, they can be easily attached to all ICC racks.

Designed to be lightweight and sturdy, these high quality, black powder coated aluminum racks are easy to install and use. This 2-post rack will support most rack mountabe Network Devices and hardware such as servers, switches, PBX systems, and other Telecom hardware. Includes 3/8-16 bolts and washers for assembly and #12 mounting screws.

The ICC 4-Post Distribution Rack provides a sturdy, cost-effective solution for supporting large rack-mountable network communications equipment in telecom/data rooms and other network facilities. The rack has a maximum adjustable depth of 32 inches, providing the flexibility to accommodate small and large equipment installations. The rack's adjustable depth and added stability make them particularly suited for heavier and deeper equipment that may exceed the load capacity of a standard 2-post rack. The racks conform to all TIA/EIA standards for 19" equipment mounting.

The open wall-mount design of the swing gate rack allows installers to swing equipment out once the equipment is mounted on the rack. This simplifies wiring tasks. Cable tie points and Velcro tie loops can neatly organize routed cable throughout the rack, while a 150 lb. capacity provides enough strength to hold heavy equipment. Punching down can be accomplished while the unit is completely opened. The swing gate wall mount rack comes in 19 inch depth, and 12 and 20 rack mount space sizes with a black powder coated finish. Units can be mounted to swing open left or right. Includes #12 mounting screws.

15 RMS racks are intended for installations that require more rack equipment. Includes #12 rack screws.

8 RMS racks are ideal for small data and telecom installations. They can be easily assembled and come in a durable black powder coated finish to complement rack mounted products. Includes #12 rack screws.

For much larger installations, the 30 RMS steel rack comes in handy. Designed with the same quality and ease of use as it's counterparts, it provides an ideal solution for larger installations. Includes #12 rack screws.

ICC’s CAT 5e patch panels offer cost-effective solution to achieve high performance that exceeds ANSI/TIA-568 Category CAT 5e standards. Patch panel rear cable management bars are available to mount onto 110-type patch panels for rear cable support. The panels come pre-configured for T568A/B wiring.

The Category 6 (CAT 6) 24-port, 1 RMS patch panel exceeds TIA’s Category 6 performance standard. This horizontal patch panel is designed with rear 110 IDC's for quick and easy punch-down termination. It also comes integrated with a universal label for either 568-A or B wiring. Package includes #12 rack screws.